Leave Your Message

Single structure custom vertical lift hopper bucket conveyor TD belt type cement bucket elevator

TD type according to JB3926-85 "vertical bucket elevator" standard design and manufacture, the current domestic commonly used bucket elevator are vertical type, relatively new. Bucket elevator is suitable for vertical transportation of powder, granular and small block and small grinding and polishing of bulk materials, such as grain, coal, cement, crushed ore, etc. Lifting height up to 40m. TD bucket elevator has four types of hopper Q (shallow bucket), H (arc bottom bucket), ZD (deep bucket), SD (deep bucket).

    参数4TD斗提2.jpg

    TD斗提细节 (4).jpgTD斗提细节 (3).jpg

    TD斗提细节 (1).jpgTD斗提细节 (2).jpg

    公司1.jpg

    TD斗提厂家图 (5).jpgTD斗提厂家图 (1).jpgTD斗提厂家图 (6).jpg

    展会详情5.jpg

    certificate

    ISO-9001体系认证-2ur4
    环境管理体系_(3)-min6sa
    职业健康安全管理体系认证-英文-minqkk
    2022年外汇局备案_-中德产业园-minctq
    16949_(英文)-minraw
    武器装备证-2-minwqd
    10- 一种耐75°高温材质的钢丝螺套foh
    9-一种安装柄可以自动复位的无尾螺套rli
    1-全自动螺套生产设备6x9
    4-精密电成型检查筛g9d
    14-一种新型具有高频率检测电磁筛4eb
    13-一种具有防爆性能的圆形摇摆筛zoc
    01020304050607080910
    65420bfvuf 65420bev2d
    6579a0f7jt 6579a0fi68
    6579a0fpvo

    FAQ

    • 1

      How do you make sure all the screws pass?

      We produce mainly 5H precision screw jackets, which are higher than the 6H precision required for inspection, and the production standard is higher than the inspection standard.

    • 2

      What is the lead time for the screw bushing?

      We are a manufacturer, the spot can be delivered on the same day, the slowest is tomorrow's shipment, self-tapping screw set is generally 7 days, self-tapping and pin non-standard products starting quantity is 2000pcs.

    • 3

      Why is stainless steel material magnetic?

      Stainless steel processing deformation process, it will produce weak magnetism is not the material itself has a problem.

    • 4

      How do I remove the screw-in sleeve after installation?

      After the installation of the screw sleeve is not suitable for the specifications can be used to use a special triangular sleeve remover, knocking the tail, then reverse rotation to remove the screw sleeve.